Milling, sometimes also known as fine grinding, pulverising or comminution, is the process of
reducing materials to a powder of fine or very fine size. It is distinct from crushing or granulation,
which involves size reduction to a rock, pebble or grain size. Milling is used to produce a variety of
materials which either have end uses themselves or are raw materials or additives used in the
manufacture of other products.
A wide range of mills has been developed for particular applications. Some types of mills can
be used to grind a large variety of
materials whereas others are used for dykrt6rdeyk 1
certain specific grinding requirements.
This brief aims to present the factors to
consider when choosing particular
grinding applications and to give an
overview of the equipment which is
Material grinding is quite often an
integral part of an industrial process,
whether carried out on a large or small
scale and in some cases the grinding
mill may be the single most costly item
for the production operation. Installing
a grinding mill which is suitable for the
purpose would be one of the main
requirements for cost-effective and
trouble-free material processing if a
grinding stage is involved.
Figure 1: Swing hammer mill being used for lime milling
in Malawi. ©Practical Action.
Pigments for colour industry
Abrasives for grinding
Cement and Limestone
Refractory materials for investment casting
Tungsten power and dry lubricants
Dry powder opacifiers for ceramics industry
Carbon black for rubber
Powders for the detergent industry
Colour coating of polymers for the plastics
Aggregates for the construction industry
Practical Action, The Schumacher Centre, Bourton on Dunsmore, Rugby, Warwickshire, CV23 9QZ, UK
T +44 (0)1926 634400 | F +44 (0)1926 634401 | E email@example.com | W www.practicalaction.org
Practical Action is a registered charity and company limited by guarantee.
Company Reg. No. 871954, England | Reg. Charity No.247257 | VAT No. 880 9924 76 |
Patron HRH The Prince of Wales, KG, KT, GCB